Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dodge
    3. :
  3. Journey
    4. : To reset the service light on the Dodge Journey.

Dodge Journey - Video tutorial

Model: Dodge Journey MK 1 - Years 2008-2020
Part: Checks and maintenance
Operation: To reset the service light on the Dodge Journey.

Below, we will discover the instructions that will allow us to reset the service indicator (oil change) light of the Dodge Journey. First, we get inside the car and start the instrument panel by turning the key to position one. Then, we press and hold the accelerator pedal until the engine oil light is reset, as shown in the video. At this point, we turn off the instrument panel and turn it back on, pressing the accelerator pedal for another ten seconds. We will then see the indicator light reset on the instrument panel!


Posted on 25 July 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos