Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster in the Dodge Journey?

Model: Dodge Journey MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Instrument cluster

Video tutorial

Removing the instrument cluster in the Dodge Journey is a straightforward and quick task. First, ensure the key is not in the ignition for safety.

Start by entering the cabin, then use a plastic trim tool to unclip the left air vent trim. Next, unclip the cover on the opposite side, remove the entire lower cover of the steering column, and unscrew the instrument cluster screws using a Torx T15 socket.

At this point, you can pull the module from the dashboard and disconnect the various connectors.


Updated on 22 June 2026 by ScegliAuto


Related tutorials

How to Remove the Air Vents on Dodge Journey
How to Remove the Air Vents on Dodge Journey
Dodge Journey (2008-2020 / MK 1) Remove the air vents (side dashboard) on a Dodge Journey. Use multiple levers to remove the vents: lever at the top and bottom with the levers (as sh…
Where is the fuse box of the Dodge Journey located?
Where is the fuse box of the Dodge Journey located?
Dodge Journey (2008-2020 / MK 1) If you are looking for the box containing all the fuses for your Dodge Journey, you just need to follow all the steps described in the following guid…
How to Remove the Gearbox of the Dodge Journey 2.4L
How to Remove the Gearbox of the Dodge Journey 2.4L
Dodge Journey (2008-2020 / MK 1) Below are the steps that will allow you to remove and replace the gearbox of the Dodge Journey 2.4L, following the instructions provided. First, open…

Other guides you may be interested in

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos