Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster from a Dodge Caliber

Model: Dodge Caliber MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Instrument cluster

Video tutorial

First, open the doors and use a plastic lever to detach the side caps of the dashboard; then remove the gear surround and the central dashboard trim where the air knobs and radio are located (disconnect the connectors to free the component). At this point, remove all the screws securing the upper dashboard (the screws located in the central body, at the sides of the radio housing, inside the glove compartment, and within the side caps, both right and left).

Once done, you can detach the covers of the front pillars and the air vent panel on the windscreen; now, using a short screwdriver, unscrew the screws of the dashboard just below the windscreen and then remove the upper cover. Now you can extract the instrument cluster, for which you need to disconnect the cable connectors at the back.

For reassembly, follow the reverse of the described operations.


Updated on 10 March 2026 by ScegliAuto


Related tutorials

What is the Fuse Diagram for the Dodge Caliber?
What is the Fuse Diagram for the Dodge Caliber?
Dodge Caliber (2006-2012 / MK 1) If one or more devices in your Dodge Caliber are malfunctioning, the first thing to do is check the condition of the fuses. This video shows the loca…
Where are the Fuses in the Dodge Caliber?
Where are the Fuses in the Dodge Caliber?
Dodge Caliber (2006-2012 / MK 1) All the fuses in the Dodge Caliber are contained within the single fuse box located inside the car: this is situated in the engine bay, on the right …
Where to Find the Fuse Box on a 2006 Dodge Caliber
Where to Find the Fuse Box on a 2006 Dodge Caliber
Dodge Caliber (2006-2012 / MK 1) To find the fuse box on your 2006 Dodge Caliber, carefully read the instructions below and put them into practice. First, park the vehicle safely on …

Other guides you may be interested in

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos