Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where are the Fuses in the Dodge Caliber?

Model: Dodge Caliber MK 1 - Years 2006-2012
Part: Fuse box

All the fuses in the Dodge Caliber are contained within the single fuse box located inside the car: this is situated in the engine bay, on the right side. You can locate all the fuses by opening the bonnet and removing the cover of the box: here you will find the fuses responsible for the operation of the dipped headlights, the radio, the windscreen wipers, etc. Each fuse is listed with the appropriate code found in the vehicle's owner's manual, along with its corresponding amperage.

Updated on 27 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Fuses on a Dodge Caliber
How to Replace Fuses on a Dodge Caliber
Dodge Caliber (2006-2012 / MK 1) Replace damaged fuses located in the engine bay of a Dodge Caliber. Open the cover and check the dashboard warning with the ignition on. Use a plasti…
Where is the fuse box located in the Dodge Caliber?
Where is the fuse box located in the Dodge Caliber?
Dodge Caliber (2006-2012 / MK 1) If you want to find the box that contains all the various fuses for your Dodge Caliber, then all you need to do is read the following guide and apply…
What is the Fuse Diagram for the Dodge Caliber?
What is the Fuse Diagram for the Dodge Caliber?
Dodge Caliber (2006-2012 / MK 1) If one or more devices in your Dodge Caliber are malfunctioning, the first thing to do is check the condition of the fuses. This video shows the loca…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos