Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dodge
    3. : Caliber

Dodge Caliber - Video guides

Dodge Caliber (2006-2012 / MK 1)
Disassembly of the front seat of the Dodge Caliber
The instructions in this guide will show us the procedure for disassembling and removing the driver's front seat of the Dodge Caliber. First, let's open the …Read all…
Posted on 15 January 2026 by ScegliAuto
Dodge Caliber (2006-2012 / MK 1)
How to reset the service light on a Dodge Caliber?
In this tutorial, we can see how to reset the service light on the Dodge Caliber, an extremely simple and quick operation to be performed only after completing …Read all…
Posted on 5 December 2025 by ScegliAuto
Dodge Caliber (2006-2012 / MK 1)
Where is the fuse box located in the Dodge Caliber?
If you want to find the box that contains all the various fuses for your Dodge Caliber, then all you need to do is read the following guide and apply what is …Read all…
Posted on 25 November 2025 by ScegliAuto
Dodge Caliber (2006-2012 / MK 1)
Where is the fuse box located in the Dodge Caliber?
On Dodge Caliber vehicles produced from 2006 to 2012, a fuse box is located. The fuse box is located inside the engine compartment, near the battery. To access …Read all…
Posted on 25 December 2024 by ScegliAuto
Dodge Caliber (2006-2012 / MK 1)
How to locate the fuse box and understand its diagrams in a Dodge Caliber
The fuse box of a Dodge Caliber car can be located inside the engine compartment, positioned at the right end of it; it contains fuses assigned to: ignition …Read all…
Posted on 2 August 2024 by ScegliAuto
Dodge Caliber (2006-2012 / MK 1)
How to Replace the Front Headlamp Bulb on a Dodge Caliber
This guide briefly outlines the steps to remove and replace the front headlamp bulb on a Dodge Caliber. First, open the bonnet of the vehicle and start by …Read all…
Posted on 11 September 2026 by ScegliAuto
Dodge Caliber (2006-2012 / MK 1)
Where are the Fuses in the Dodge Caliber?
All the fuses in the Dodge Caliber are contained within the single fuse box located inside the car: this is situated in the engine bay, on the right side. You …Read all…
Posted on 27 August 2026 by ScegliAuto
Dodge Caliber (2006-2012 / MK 1)
Location of the Fuse Box in the Dodge Caliber
Inside the Dodge Caliber, produced from 2006 to 2012, there is a single fuse box. The fuse box is located in the engine compartment, specifically on the right …Read all…
Posted on 22 August 2026 by ScegliAuto
Dodge Caliber (2006-2012 / MK 1)
How to Replace the Starter Motor on a Dodge Caliber?
To replace the starter motor on a Dodge Caliber, open the bonnet to locate the components inside the engine compartment. Here, you will need to disconnect the …Read all…
Posted on 12 August 2026 by ScegliAuto
Dodge Caliber (2006-2012 / MK 1)
Where to Find the Fuse Box on a 2006 Dodge Caliber
To find the fuse box on your 2006 Dodge Caliber, carefully read the instructions below and put them into practice. First, park the vehicle safely on a flat …Read all…
Posted on 9 July 2026 by ScegliAuto
Dodge Caliber (2006-2012 / MK 1)
What is the Fuse Diagram for the Dodge Caliber?
If one or more devices in your Dodge Caliber are malfunctioning, the first thing to do is check the condition of the fuses. This video shows the location of …Read all…
Posted on 29 June 2026 by ScegliAuto
Dodge Caliber (2006-2012 / MK 1)
Remove the Radio from the Dodge Caliber
Do you want to replace the radio in the Dodge Caliber? Here’s how to remove it from the centre console. To take out the radio, remove the gear knob and the …Read all…
Posted on 29 April 2026 by ScegliAuto
Dodge Caliber (2006-2012 / MK 1)
Replacing the Cabin Filter on a Dodge Caliber
In this simple tutorial, we will see how to remove and replace the cabin filter on a Dodge Caliber. The filter is located in the front passenger compartment, …Read all…
Posted on 26 April 2026 by ScegliAuto
Dodge Caliber (2006-2012 / MK 1)
Replacing the Air Filter on a Dodge Caliber
In the following tutorial, we will see how to remove and replace the engine air filter on a Dodge Caliber. First, open the bonnet of your car and use a …Read all…
Posted on 26 April 2026 by ScegliAuto
Dodge Caliber (2006-2012 / MK 1)
Removing the Front Headlamp of a Dodge Caliber
Learn how to remove the front headlamp of a Dodge Caliber. Open and lift the bonnet by pulling the bonnet release lever and secure it. Unscrew the retaining …Read all…
Posted on 5 April 2026 by ScegliAuto
Dodge Caliber (2006-2012 / MK 1)
How to Replace the Rear Light Bulbs on a Dodge Caliber
Replace the rear light bulbs on a Dodge Caliber. In this video, see how to remove the light unit. Open the boot lid, unscrew the securing screws located at the …Read all…
Posted on 3 April 2026 by ScegliAuto
Dodge Caliber (2006-2012 / MK 1)
How to Replace the Starter Motor on a Dodge Caliber
Learn how to remove the starter motor on a Dodge Caliber. After lifting the bonnet and securing it with the prop rod, remove the battery and the air box (if …Read all…
Posted on 3 April 2026 by ScegliAuto
Dodge Caliber (2006-2012 / MK 1)
How to Replace Fuses on a Dodge Caliber
Replace damaged fuses located in the engine bay of a Dodge Caliber. Open the cover and check the dashboard warning with the ignition on. Use a plastic lever to …Read all…
Posted on 3 April 2026 by ScegliAuto
Dodge Caliber (2006-2012 / MK 1)
How to Remove the Instrument Cluster from a Dodge Caliber
First, open the doors and use a plastic lever to detach the side caps of the dashboard; then remove the gear surround and the central dashboard trim where the …Read all…
Posted on 29 March 2026 by ScegliAuto
Dodge Caliber (2006-2012 / MK 1)
How to Replace the Timing Belt on a Dodge Caliber
To carry out this replacement, you will need to remove the engine from its cradle. If you do not have the proper equipment, seek the help of a professional. …Read all…
Posted on 9 March 2026 by ScegliAuto

See also:

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos