Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor on a Dodge Caliber?

Model: Dodge Caliber MK 1 - Years 2006-2012
Part: Starter motor

To replace the starter motor on a Dodge Caliber, open the bonnet to locate the components inside the engine compartment. Here, you will need to disconnect the air intake hose to gain access to the starter motor underneath. The device is located between the side of the engine block and the battery: loosen the bolts that secure it to its housing and then disconnect the power cables before you can remove it. Once removed, insert the new spare part, reattaching the air intake hose.

Updated on 12 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Starter Motor on a Dodge Caliber
Dodge Caliber (2006-2012 / MK 1) Learn how to remove the starter motor on a Dodge Caliber. After lifting the bonnet and securing it with the prop rod, remove the battery and the air …
How to Replace the Front Headlamp Bulb on a Dodge Caliber
How to Replace the Front Headlamp Bulb on a Dodge Caliber
Dodge Caliber (2006-2012 / MK 1) This guide briefly outlines the steps to remove and replace the front headlamp bulb on a Dodge Caliber. First, open the bonnet of the vehicle and sta…
Location of the Fuse Box in the Dodge Caliber
Location of the Fuse Box in the Dodge Caliber
Dodge Caliber (2006-2012 / MK 1) Inside the Dodge Caliber, produced from 2006 to 2012, there is a single fuse box. The fuse box is located in the engine compartment, specifically on …

Other guides you may be interested in

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos