Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Starter Motor Replacement

Model: Dodge Caliber MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Starter motor

Video tutorial

The starter motor is located on the gearbox, just below the air filter housing. Start by disconnecting the battery and removing the cover of the air filter housing along with the intake hose, disconnecting the mass air flow sensor connector.

Once access is created, you also need to remove the throttle body that interferes with the starter motor's mounting brackets. At this point, disconnect the cables behind the starter solenoid, unscrew the fixing bolts, and remove it from its position to proceed with the installation of the new starter motor: it is advisable to choose a refurbished product.


Updated on 12 February 2026 by ScegliAuto


Related tutorials

How to Replace the Starter Motor on a Dodge Caliber
Dodge Caliber (2006-2012 / MK 1) Learn how to remove the starter motor on a Dodge Caliber. After lifting the bonnet and securing it with the prop rod, remove the battery and the air …
How to Replace the Starter Motor on a Dodge Caliber?
How to Replace the Starter Motor on a Dodge Caliber?
Dodge Caliber (2006-2012 / MK 1) To replace the starter motor on a Dodge Caliber, open the bonnet to locate the components inside the engine compartment. Here, you will need to disco…
Replacement of Ignition Coil for Third Cylinder
Replacement of Ignition Coil for Third Cylinder
Dodge Caliber (2006-2012 / MK 1) If the engine runs unevenly after starting and the engine warning light is illuminated, there is likely an ignition issue in one of the cylinders, me…

Other guides you may be interested in

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos