Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Dodge Charger.

Model: Dodge Charger LD - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Battery

See other generations:
Video tutorial

Today we will look at the steps and procedure for removing and replacing the battery in a Dodge Charger. First, let's open the trunk lid and start by disconnecting both battery terminals (positive and negative), which are located under the floor panel.

Next, we will unscrew the bracket screw to remove it from the battery compartment, as shown in the video. At this point, we will replace and install the new battery, ensuring it is the correct type and has the same amperage; we will insert it in the correct orientation and make the connections, finally checking that the engine starts properly!


Posted on 24 November 2025 by ScegliAuto


Related tutorials

How to Replace the Key Battery in the New Dodge Charger?
How to Replace the Key Battery in the New Dodge Charger?
Dodge Charger (2011-2023 / LD) Replacing the battery inside the smart key of your new Dodge Charger is certainly one of the simplest tasks to carry out independently. With the foll…
How to Replace the Key Battery on a 2022 Dodge Charger
How to Replace the Key Battery on a 2022 Dodge Charger
Dodge Charger (2011-2023 / LD) If you own a 2022 Dodge Charger and are experiencing issues with the car remote, you may need to replace the battery inside. In this guide, learn how…
What is the Position Light Fuse in the Dodge Charger?
What is the Position Light Fuse in the Dodge Charger?
Dodge Charger (2006-2011 / LX) If the position lights on your Dodge Charger have suddenly stopped working and the bulbs are intact, check the status of the relevant fuse, the locat…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos