Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What is the Position Light Fuse in the Dodge Charger?

Model: Dodge Charger LX - Years 2006-2011
Part: Headlight

If the position lights on your Dodge Charger have suddenly stopped working and the bulbs are intact, check the status of the relevant fuse, the location of which is indicated in this video. As shown, the fuse is located in the box inside the boot, protected by the black plastic cover to the right of the battery. It is labelled F47 and is the fifth in the last row when looking at the box from the front. If faulty, ensure you use a replacement with equivalent specifications and operate with the vehicle switched off.

Updated on 7 September 2026 by ScegliAuto

Video tutorial

Related tutorials

What is the fuse for the tailgate lock in the Dodge Charger?
What is the fuse for the tailgate lock in the Dodge Charger?
Dodge Charger (2011-2023 / LD) If the tailgate lock of our Dodge Charger suddenly stopped working, we can first check the status of the corresponding fuse, whose location is indica…
How to Remove Injectors from a Dodge Charger?
How to Remove Injectors from a Dodge Charger?
Dodge Charger (2011-2023 / LD) This tutorial shows how to remove the injectors from a Dodge Charger, a very simple operation. First, wait for the engine to cool sufficiently. Then,…
Where are the windshield wiper relays located in the Dodge Charger?
Where are the windshield wiper relays located in the Dodge Charger?
Dodge Charger (2006-2011 / LX) If the windshield wipers of our Dodge Charger have suddenly stopped working and the various fuses are intact, we can then check the status of the res…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos