Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dodge
    3. :
  3. Charger
    4. : Headlight

Dodge Charger - Headlight

Dodge Charger (2006-2011 / LX)
How to disassemble the front headlights of the Dodge Charger
In this guide, we will see the instructions that will allow us to disassemble and replace the front headlights of the Dodge Charger, in simple steps. First, we …read all…
Posted on 15 April 2024 by ScegliAuto
Dodge Charger (2006-2011 / LX)
What is the fuse for the parking lights in the Dodge Charger?
If the position lights of our Dodge Charger have suddenly stopped working and the bulbs are intact, we can then check the status of the corresponding fuse, …read all…
Posted on 8 January 2024 by ScegliAuto
Dodge Charger (2006-2011 / LX)
Car headlight replacement
The guide shows you how to replace the headlight of your car. The new lighthouse must be bought first. Then you have to start working with a cold engine to …read all…
Posted on 14 September 2023 by ScegliAuto
Alternator (1) Car stereo (3) Coil (1) Spark plugs (1) Bodywork (1) Key (2) Timing belt (1) V-belt (1) Air conditioning controls (1) -board computer (3) Checks and maintenance (3) Throttle body (1) Dashboard (4) Brake discs (1) Headlight (3) Tail light (1) Air filter (3) Cabin air filter (1) Injectors (1) Light bulb (1) Rear light bulb (1) Antifreeze liquid (3) Engine oil (1) Front bumper (2) Radiator (1) Fuse box (1) Windscreen wipers (3) Engine head (1) Central tunnel (2) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos