Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dodge
    3. :
  3. Charger
    4. : Antifreeze liquid

Dodge Charger - Antifreeze liquid

Dodge Charger (2006-2011 / LX)
Tutorial on how to drain the coolant of our vehicle
In this video we will show you how to drain your vehicle's coolant. First we have to take a basin and slide it under our car more precisely under the radiator. …read all…
Posted on 20 September 2023 by ScegliAuto
Dodge Charger (2006-2011 / LX)
How to put antifreeze liquid in the radiator
With the arrival of winter and night frosts, our machine needs more attention, so that it can guarantee the same efficient performance for the rest of the …read all…
Posted on 15 September 2023 by ScegliAuto
Dodge Charger (2006-2011 / LX)
Replacement of the coolant reservoir
If the coolant tank needs to be replaced, first drain the system by disconnecting the special drainage pipe located in the lower part of the radiator (blowing …read all…
Posted on 8 September 2023 by ScegliAuto
Alternator (1) Car stereo (3) Coil (1) Spark plugs (1) Bodywork (1) Key (2) Timing belt (1) V-belt (1) Air conditioning controls (1) -board computer (3) Checks and maintenance (3) Throttle body (1) Dashboard (4) Brake discs (1) Headlight (3) Tail light (1) Air filter (3) Cabin air filter (1) Injectors (1) Light bulb (1) Rear light bulb (1) Antifreeze liquid (3) Engine oil (1) Front bumper (2) Radiator (1) Fuse box (1) Windscreen wipers (3) Engine head (1) Central tunnel (2) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos