Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dodge
    3. :
  3. Charger
    4. : Air filter

Dodge Charger - Air filter

Dodge Charger (2006-2011 / LX)
Engine air filter replacement
The replacement of the engine air filter is a simple operation to perform and which allows us, if we proceed alone, to save the mechanic's money. This filter …read all…
Posted on 11 September 2023 by ScegliAuto
Dodge Charger (2006-2011 / LX)
Removing the air filter box.
To remove the box, which contains the engine air filter, it is necessary, first of all, to unscrew the bolt that secures the box from the air filter housing to …read all…
Posted on 4 September 2023 by ScegliAuto
Dodge Charger (2011-2023 / LD)
Engine air filter replacement
The engine air filter container (or AIRBOX) is located on the side, near the coolant reservoir. Then unscrew the fixing screws of the cover, lift it and remove …read all…
Posted on 29 July 2023 by ScegliAuto
Alternator (1) Car stereo (3) Coil (1) Spark plugs (1) Bodywork (1) Key (2) Timing belt (1) V-belt (1) Air conditioning controls (1) -board computer (3) Checks and maintenance (3) Throttle body (1) Dashboard (4) Brake discs (1) Headlight (3) Tail light (1) Air filter (3) Cabin air filter (1) Injectors (1) Light bulb (1) Rear light bulb (1) Antifreeze liquid (3) Engine oil (1) Front bumper (2) Radiator (1) Fuse box (1) Windscreen wipers (3) Engine head (1) Central tunnel (2) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos