Do it yourself
| ||||
|
Dodge Charger - Windscreen wipers
Dodge Charger (2006-2011 / LX)
Replace the windshield wipers in your car The replacement of the windshield wipers is one of those operations that can be done on your car by doing it yourself, in order to get some personal …read all… Posted on 9 September 2023 by ScegliAuto
Dodge Charger (2006-2011 / LX)
Removing the wiper motor To be able to disassemble the wiper drive motor, start by removing the brush control arms: then remove the caps placed to protect the arm fixing nuts, unscrew …read all… Posted on 30 August 2023 by ScegliAuto
Dodge Charger (2006-2011 / LX)
Removing the wiper mechanism The mechanism for activating the wiper blades is made up of a motor and a system of levers able to rotate the blades: this mechanism is located under the …read all… Posted on 28 August 2023 by ScegliAuto Alternator (1) Car stereo (3) Coil (1) Spark plugs (1) Bodywork (1) Key (2) Timing belt (1) V-belt (1) Air conditioning controls (1) -board computer (3) Checks and maintenance (3) Throttle body (1) Dashboard (4) Brake discs (1) Headlight (3) Tail light (1) Air filter (3) Cabin air filter (1) Injectors (1) Light bulb (1) Rear light bulb (1) Antifreeze liquid (3) Engine oil (1) Front bumper (2) Radiator (1) Fuse box (1) Windscreen wipers (3) Engine head (1) Central tunnel (2) Steering wheel (1) |
Handbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |