Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wiper Blades on Your Car

Model: Dodge Charger LX - Years: 2006, 2007, 2008, 2009, 2010, 2011
Part: Windshield wipers

See other generations:
Video tutorial

Replacing the wiper blades is one of those tasks you can do on your own car as a DIY project, allowing you to gain some personal satisfaction and save a bit of money. When the wiper blades wear out, they need to be replaced.

They must always be in perfect condition because any malfunction can impair the driver's visibility, risking accidents. To replace them, lift the wiper arm positioned on the windscreen.

Flip the wiper blade over and locate a small lever that holds the arm to the rod; once found, push it and then disengage it downwards. After this, follow the same method to install the new blade.


Updated on 20 February 2026 by ScegliAuto


Related tutorials

Removing the Windscreen Wiper Motor
Removing the Windscreen Wiper Motor
Dodge Charger (2006-2011 / LX) To remove the windscreen wiper motor, start by taking off the wiper arms: remove the caps protecting the nuts securing the arms, unscrew the nuts, an…
Disassembling the Windscreen Wiper Mechanism
Disassembling the Windscreen Wiper Mechanism
Dodge Charger (2006-2011 / LX) The wiper motor mechanism consists of a motor and a lever system that rotates the wipers. This mechanism is located beneath the plastic cover directl…
Where are the wiper relays located in the Dodge Charger?
Where are the wiper relays located in the Dodge Charger?
Dodge Charger (2006-2011 / LX) If the windscreen wipers on your Dodge Charger have suddenly stopped working and the various fuses are intact, check the status of the respective rel…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos