Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dodge
    3. :
  3. Charger
    4. : Car stereo

Dodge Charger - Car stereo

Dodge Charger (2011-2023 / LD)
To reset the uconnect system of the Dodge Charger.
To reset the uconnect system of the Dodge, we start by turning on the car's instrument panel, and if the infotainment system is off, we turn it on. Once the …read all…
Posted on 1 November 2023 by ScegliAuto
Dodge Charger (2011-2023 / LD)
How to reset the Uconnect in the Dodge Charger
In this video we see how to reset the Uconnect system in the Dodge Charger; this guide is also good for other models, since it is a car radio common to the FCA …read all…
Posted on 22 March 2024 by ScegliAuto
Dodge Charger (2006-2011 / LX)
Car radio disassembly instructions
In order to disassemble the car radio it is necessary to first unhook the frame around the controls of the center console and the car radio itself: just pry …read all…
Posted on 27 August 2023 by ScegliAuto
Alternator (1) Car stereo (3) Coil (1) Spark plugs (1) Bodywork (1) Key (2) Timing belt (1) V-belt (1) Air conditioning controls (1) -board computer (3) Checks and maintenance (3) Throttle body (1) Dashboard (4) Brake discs (1) Headlight (3) Tail light (1) Air filter (3) Cabin air filter (1) Injectors (1) Light bulb (1) Rear light bulb (1) Antifreeze liquid (3) Engine oil (1) Front bumper (2) Radiator (1) Fuse box (1) Windscreen wipers (3) Engine head (1) Central tunnel (2) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos