Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Engine Air Filter

Model: Dodge Charger LX - Years 2006-2011
Part: Air filter

Replacing the engine air filter is a simple task that allows you to save money on mechanic fees if you do it yourself. This filter ensures that clean air reaches the engine, which is essential for the car's efficiency. You should replace the engine air filter annually or every 12,000 miles or 20,000 km. This filter is a black plastic box located above or to the side of the engine. Once you open the box, you can remove the old filter. Place the new engine air filter into the filter box, with the rubber edge facing upwards and ensuring it is positioned correctly.

Updated on 21 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Engine Air Filter
Replacing the Engine Air Filter
Dodge Charger (2011-2023 / LD) The engine air filter housing (or AIRBOX) is located on the side, near the coolant reservoir. Unscrew the fixing screws of the cover, lift it, and ex…
Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Dodge Charger (2006-2011 / LX) The cabin air filter is located under the front windscreen on the passenger side, just below the wiper blade; therefore, open the front bonnet to fac…
How do you replace the air filter of the Dodge Charger?
How do you replace the air filter of the Dodge Charger?
Dodge Charger (2011-2023 / LD) It will be possible to replace the air filter of the Dodge Charger by opening the hood so that it is possible to access the components inside the eng…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos