Do it yourself
Frequently asked questions about cars and motorcycles

Battery Replacement Instructions

Model: Dodge Caliber MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Battery

Video tutorial

Replacing the battery is a typical DIY maintenance task, especially when it is located in an easily accessible position, as is the case with this vehicle where the battery is positioned just behind the left front headlamp. Once the plastic cover is removed, loosen the fastening nuts of the terminals and free the battery poles.

Then, remove the fixing bracket at the bottom of the battery and extract it from its location. Insert the new battery, ensuring it has the correct specifications in terms of capacity and cranking power, and secure it with the lower bracket, reconnecting the terminals.


Updated on 15 February 2026 by ScegliAuto


Related tutorials

Dodge Caliber (2006-2012 / MK 1) Once the vehicle is raised on a lift, remove the wheel, take off the safety clip protecting the driveshaft nut, and unscrew the nut itself. Then, uns…
Dodge Caliber (2006-2012 / MK 1) To replace the front headlamp bulb (H13 fitting), open the bonnet and remove the plastic cover from the battery compartment. Disconnect one battery t…
Dodge Caliber (2006-2012 / MK 1) In this simple tutorial, we will see how to remove and replace the cabin filter on a Dodge Caliber. The filter is located in the front passenger comp…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos