Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Dodge Caliber

Model: Dodge Caliber MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Headlight bulb

Video tutorial

This guide briefly outlines the steps to remove and replace the front headlamp bulb on a Dodge Caliber. First, open the bonnet of the vehicle and start by removing the plastic protective cover of the bulb; then disconnect the electrical connector of the light, releasing the dipped beam bulb from the holder, as shown in the video.

At this point, install the new front headlamp bulb of the correct type and fitting; reconnect the electrical connector and secure the bulb in the holder!


Updated on 11 September 2026 by ScegliAuto


Related tutorials

Removing the Front Headlamp of a Dodge Caliber
Removing the Front Headlamp of a Dodge Caliber
Dodge Caliber (2006-2012 / MK 1) Learn how to remove the front headlamp of a Dodge Caliber. Open and lift the bonnet by pulling the bonnet release lever and secure it. Unscrew the re…
How to Replace the Rear Light Bulbs on a Dodge Caliber
How to Replace the Rear Light Bulbs on a Dodge Caliber
Dodge Caliber (2006-2012 / MK 1) Replace the rear light bulbs on a Dodge Caliber. In this video, see how to remove the light unit. Open the boot lid, unscrew the securing screws loca…
Disassembly of the front seat of the Dodge Caliber
Disassembly of the front seat of the Dodge Caliber
Dodge Caliber (2006-2012 / MK 1) The instructions in this guide will show us the procedure for disassembling and removing the driver's front seat of the Dodge Caliber. First, let's o…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos