Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dodge
    3. :
  3. Caliber
    4. : Headlight bulb

Dodge Caliber - Headlight bulb

Headlight Bulb Dodge Caliber (2006-2012 / mk 1)

Dodge Caliber (2006-2012 / MK 1)
How to Replace the Front Headlamp Bulb on a Dodge Caliber
This guide briefly outlines the steps to remove and replace the front headlamp bulb on a Dodge Caliber. First, open the bonnet of the vehicle and start by …Read all…
Posted on 11 September 2026 by ScegliAuto
Dodge Caliber (2006-2012 / MK 1)
Front Headlamp Bulb Replacement
To replace the front headlamp bulb (H13 fitting), open the bonnet and remove the plastic cover from the battery compartment. Disconnect one battery terminal …Read all…
Posted on 25 February 2026 by ScegliAuto
Dodge Caliber (2006-2012 / MK 1)
Replacing the Front Headlamp Bulb
To access the bulb holder of the left front headlamp (driver's side), first remove the plastic cover above the battery compartment; then, disconnect the bulb …Read all…
Posted on 25 February 2026 by ScegliAuto
Air conditioning (1) Car stereo (1) Battery (1) Ignition coil (1) Control arm (2) Transmission (1) Key (1) Timing belt (3) V-belt (1) Headlight (1) Tail light (1) Air filter (1) Cabin air filter (3) Fuel injectors (1) Headlight bulb (3) Tail light bulb (1) Antifreeze coolant (1) Engine (1) Starter motor (3) Engine oil (1) Instrument cluster (1) Fuse box (8) Seat (1) Axle shaft (2) Service warning light (1) Cylinder head (1) Valve (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos