Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Fuses on a Dodge Caliber

Model: Dodge Caliber MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Fuse box

Video tutorial

Replace damaged fuses located in the engine bay of a Dodge Caliber. Open the cover and check the dashboard warning with the ignition on. Use a plastic lever to remove the cover next to the air box (right side), then disconnect the damaged fuses using needle-nose pliers.

Once this is done, insert the new fuses into the designated slots in the fuse box. Close the fuse inspection box with the cover, and test the proper functioning of the car by turning on the ignition with the appropriate key.


Updated on 13 March 2026 by ScegliAuto


Related tutorials

Where are the Fuses in the Dodge Caliber?
Where are the Fuses in the Dodge Caliber?
Dodge Caliber (2006-2012 / MK 1) All the fuses in the Dodge Caliber are contained within the single fuse box located inside the car: this is situated in the engine bay, on the right …
Where is the fuse box located in the Dodge Caliber?
Where is the fuse box located in the Dodge Caliber?
Dodge Caliber (2006-2012 / MK 1) On Dodge Caliber vehicles produced from 2006 to 2012, a fuse box is located. The fuse box is located inside the engine compartment, near the battery.…
How to Locate the Fuse Box and Understand the Diagrams in a Dodge Caliber
How to Locate the Fuse Box and Understand the Diagrams in a Dodge Caliber
Dodge Caliber (2006-2012 / MK 1) You can locate the fuse box of a Dodge Caliber inside the engine compartment, positioned at the far right; it contains fuses assigned to: ignition sw…

Other guides you may be interested in

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos