Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Gearbox of the Dodge Journey 2.4L

Model: Dodge Journey MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Transmission

Video tutorial

Below are the steps that will allow you to remove and replace the gearbox of the Dodge Journey 2.4L, following the instructions provided. First, open the bonnet of the vehicle and begin by removing the air filter box; then disconnect the clutch cable found on the gearbox, as illustrated in the video.

At this point, lift the vehicle and remove the front wheel and the driveshaft, then unscrew the bolts of the gearbox; remove and replace the gearbox if necessary, following the video tutorial to the end!


Updated on 22 August 2026 by ScegliAuto


Related tutorials

Dodge Journey (2008-2020 / MK 1) Remove the air vents (side dashboard) on a Dodge Journey. Use multiple levers to remove the vents: lever at the top and bottom with the levers (as sh…
Dodge Journey (2008-2020 / MK 1) Removing the fog light bulbs on a Dodge Journey? Let’s go through the removal process. Raise the car on a jack, locate the bulbs to be removed at the…
Dodge Journey (2008-2020 / MK 1) To replace the gearbox of the Dodge Journey, open the bonnet to access the screws located at the rear of the engine block. Remove these screws to fre…

Other guides you may be interested in

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos