Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Cabin Fan Motor on a Dodge Journey - Fiat Freemont

Model: Dodge Journey MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Blower motor

Video tutorial

In this video tutorial, you will see the main instructions on how to remove the cabin fan motor of a Dodge Journey and a Fiat Freemont, following these steps. First, get inside the car from the passenger side and remove the glove compartment; then remove the fabric cover found below and unscrew the Torx screws securing the fan, as shown in the video.

At this point, disconnect the electrical connector and remove it completely; then apply the reverse procedure for reassembling the new component!


Updated on 16 April 2026 by ScegliAuto


Related tutorials

Removing the central console from a Fiat Freemont-Dodge Journey
Removing the central console from a Fiat Freemont-Dodge Journey
Dodge Journey (2008-2020 / MK 1) .. console from a Dodge Journey, as well as a Fiat Freemont, in simple steps. First, get inside the car and remove the gear knob by pulling it upwards.. …
Removing the Rear Door Panel on Fiat Freemont - Dodge Journey
Removing the Rear Door Panel on Fiat Freemont - Dodge Journey
Dodge Journey (2008-2020 / MK 1) .. the rear door panel of a Dodge Journey or a Fiat Freemont. First, open the rear door and use a screwdriver to unscrew the screw located under the.. …
Removing Cigarette Lighter from Dodge Journey - Fiat Freemont
Removing Cigarette Lighter from Dodge Journey - Fiat Freemont
Dodge Journey (2008-2020 / MK 1) .. steps, a procedure that is identical for the Fiat Freemont, as they are practically the same vehicle. First, get inside the car and remove any plastic.. …

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos