Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Dodge
  4. :
  5. Nitro
  6. : Removing the Dodge Nitro headlight bulb

Dodge Nitro - Video tutorial

Model: Dodge Nitro MK 1 - Years 2006-2011
Part: Headlight bulb
Operation: Removing the Dodge Nitro headlight bulb

In this video tutorial we will show you how to replace the old blown headlight bulb on the Dodge Nitro! To disassemble it, first of all open the engine hood: we identify the position to do it and disconnect its connector. Then we simply remove by pulling the rubber gasket that acts as a protection and we go to unhook the lever to be able to extract the bulb with the whole lamp holder. Check the socket and the type of bulb and replace it with the correct one. Then proceed with the reassembly by inserting it, put the rubber protection back on and connect the connector!


Posted on 9 December 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos