Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where Are the Fuse Boxes on a Dodge Nitro?

Model: Dodge Nitro MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011
Part: Fuse box

This video is currently unavailable

The Dodge Nitro, produced from 2006 to 2011, has a fuse box that contains both small and medium to large amperage fuses. The box is located under the front bonnet next to the battery.

Inside, you will find fuses that control the operation of the engine compartment, such as the starter motor and battery fuses, as well as fuses that regulate the operation of the vehicle's electronic components, such as the airbags and interior lights.

To replace a fuse, it is important to know the amperage and exact location, so it is advisable to use the diagram on the back of the box. It is crucial to replace a fuse with one of the same amperage; using a fuse with a lower amperage will compromise the operation of the electronic components and the control unit.


Posted on 10 February 2026 by ScegliAuto


Related tutorials

Where are the Fuses in a Dodge Nitro?
Where are the Fuses in a Dodge Nitro?
Dodge Nitro (2006-2011 / MK 1) The fuses in a Dodge Nitro are located inside the fuse box. In this model, there is a single box: it is situated in the engine compartment, on the dr…
How to Replace the Rear Light of the Dodge Nitro?
How to Replace the Rear Light of the Dodge Nitro?
Dodge Nitro (2006-2011 / MK 1) To remove the rear light of the Dodge Nitro, open the boot and remove the fixing rivets located on the side of the light, near the seal. Once the riv…
How to Remove the Airbag and Steering Wheel from a Dodge Nitro
How to Remove the Airbag and Steering Wheel from a Dodge Nitro
Dodge Nitro (2006-2011 / MK 1) Today, we will go through the main instructions to remove and replace the airbag and steering wheel of a Dodge Nitro by following these simple steps.…

Other guides you may be interested in

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos