Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where are the Fuses in a Dodge Nitro?

Model: Dodge Nitro MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011
Part: Fuse box

Video tutorial

The fuses in a Dodge Nitro are located inside the fuse box. In this model, there is a single box: it is situated in the engine compartment, on the driver's side. The box is positioned between the windscreen washer reservoir and the battery, on the right side of the engine.

To access it, remove the protective plastic cover by unclipping its fasteners. Inside the box, you will find the fuses that control the operation of the wipers, air conditioning compressor, cooling fan, etc.


Updated on 12 May 2026 by ScegliAuto


Related tutorials

Where Are the Fuse Boxes on a Dodge Nitro?
Dodge Nitro (2006-2011 / MK 1) The Dodge Nitro, produced from 2006 to 2011, has a fuse box that contains both small and medium to large amperage fuses. The box is located under the…
Removing Front Headlamp Bulb on Dodge Nitro
Removing Front Headlamp Bulb on Dodge Nitro
Dodge Nitro (2006-2011 / MK 1) In this video tutorial, you will learn how to replace the burnt-out front headlamp bulb on a Dodge Nitro! To remove it, first, open the bonnet: locat…
How to Replace the Rear Light of the Dodge Nitro?
How to Replace the Rear Light of the Dodge Nitro?
Dodge Nitro (2006-2011 / MK 1) To remove the rear light of the Dodge Nitro, open the boot and remove the fixing rivets located on the side of the light, near the seal. Once the riv…

Other guides you may be interested in

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos