Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Change in a Dodge Nitro

Model: Dodge Nitro MK 1 - Years 2006-2011
Part: Warning light – error code

In this video tutorial, see how to reset the oil change in a Dodge Nitro by following some simple steps: the first thing to do is maintain the vehicle, such as changing the engine oil and filters; next, after performing the DIY service, get in the car, turn off the engine, and pull the handbrake; turn on the instrument cluster without starting the engine; use the controls on the left side of the steering wheel to scroll through the settings menu until you find the "Oil change required" option. Press the accelerator pedal fully down three times within 10 seconds. Now turn off the ignition and restart the engine to check the correct reset of the oil change.

Updated on 21 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery of the Dodge Nitro
How to Replace the Key Battery of the Dodge Nitro
Dodge Nitro (2006-2011 / MK 1) If you want to replace the battery located inside your Dodge Nitro key yourself, simply follow the instructions outlined in this guide. First, obtain…
How to Replace the Rear Light of the Dodge Nitro?
How to Replace the Rear Light of the Dodge Nitro?
Dodge Nitro (2006-2011 / MK 1) To remove the rear light of the Dodge Nitro, open the boot and remove the fixing rivets located on the side of the light, near the seal. Once the riv…
How to Remove the Airbag and Steering Wheel from a Dodge Nitro
How to Remove the Airbag and Steering Wheel from a Dodge Nitro
Dodge Nitro (2006-2011 / MK 1) Today, we will go through the main instructions to remove and replace the airbag and steering wheel of a Dodge Nitro by following these simple steps.…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos