Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal of rear door panel Fiat Freemont - Dodge Journey

Model: Dodge Journey MK 1 - Years 2008-2020
Part: Door trim panel

Let's see how to remove the rear door panel of a Dodge Journey or a Fiat Freemont. First we open the rear door and go to unscrew with a screwdriver the screw that we find under the plastic cover of the handle; carry out the same operation on the opening handle, unscrewing the screws below. Once we have unscrewed all the screws of the panel and removed the window lifter button (disconnecting the electrical connector), we go to pry the sides to extract it, as shown in the video. Finally disconnect the handle cable!

Posted on 28 November 2020 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear windshield wiper motor of the Dodge Journey - Fiat Freemont.
How to replace the rear windshield wiper motor of the Dodge Journey - Fiat Freemont.
Dodge Journey (2008-2020 / MK 1) .. replace the rear windshield wiper motor of the Dodge Journey, as well as the Fiat Freemont. First, we open the rear trunk door and begin to disassemble.. …
Dodge Journey, Fiat Freemont diesel filter replacement
Dodge Journey, Fiat Freemont diesel filter replacement
Dodge Journey (2008-2020 / MK 1) .. how to remove and replace the diesel filter of a Dodge Journey and a Fiat Freemont. We open the bonnet first and we go to identify the filter and we.. …
Disassembly of the Fiat Freemont-Dodge Journey center console
Disassembly of the Fiat Freemont-Dodge Journey center console
Dodge Journey (2008-2020 / MK 1) .. we will see how to remove the center console of a Dodge Journey, but also of a Fiat Freemont, in simple steps. First we get on board the car and we go.. …

How to Remove the Engine Oil Filter of the Peugeot 308

How do you remove the engine oil filter of the Peugeot 308? Follow this guide to proceed with the replacement. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the front bonnet and secure it. Using a socket wrench, unscrew the large securing bolt of the container cap where the oil filter is located (engine compartment under the ventilation pipe). Drain the used oil from under the engine sump. Remove the worn oil filter and position a new one, ensuring it adheres well around the walls of the housing. Finally, refit the ventilation pipe and top up the engine oil. Close the front bonnet last.

Watch the video!


by ScegliAuto

More videos