Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the gear knob of a Citroen DS4

Model: DS DS 4 MK 1 - Years 2011-2018
Part: Shift knob

We can see thanks to this very short video tutorial today how to change the knob of the gear lever of a Citroen DS4 with automatic transmission, first series model produced from 2011 onwards. Well, let's start the operation immediately by taking a lever or a small flathead screwdriver and removing the front cover of the gear knob as shown in the video, after that we must unscrew with a torx key the screw at the base of the knob that holds it in position. Once this is done, we can completely remove the old gear knob and then replace it following the reverse procedure.

Posted on 13 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service indicator on the Citroen DS4
How to reset the service indicator on the Citroen DS4
DS DS 4 (2011-2018 / MK 1) If you want to manually reset the service light of your Citroen DS4 first series, you just need to follow these steps. First, get into the car and ma…
How do you reset the service light on a Citroen DS4?
How do you reset the service light on a Citroen DS4?
DS DS 4 (2011-2018 / MK 1) We changed the motor oil in our Citroen DS4 but the service light is still on in the instrument panel, well, in this very short tutorial we are shown…
Service reset on Citroen DS4
Service reset on Citroen DS4
DS DS 4 (2011-2018 / MK 1) Today we are shown, through this very useful video guide, the necessary steps to reset the service light on a Citroen DS4. This operation is really v…

Other guides you may be interested in

How to Remove the Right Front Door Panel on an Opel Mokka

To remove the right front door panel on an Opel Mokka, follow these steps: disconnect the battery terminals located in the engine bay, then use a screwdriver to remove the screws from the upper door opening lever and the screws in the handle. Next, remove the covering plastic near the lever. Unscrew the remaining screws on the door panel and detach the retaining clips. Finally, pull the panel away with your hands and unclip it from the door (disconnect the power wiring and the release cable). Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos