Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
It will be possible to perform the replacement of the motor oil in the Ducati Scrambler system by loosening the screws that fix the protective plate in the lower central part of the vehicle: once this plate has been removed from its seat, it will be possible to unscrew the drain plug of the oil pan located in this position. After removal, it will be possible to collect all the used oil in a container and also remove the oil filter located in this same point. Finally, it will be possible to top up by pouring the necessary amount of oil from the vent on the right side of the vehicle in question.

Posted on 19 April 2025 by ScegliAuto

Video tutorial

Related tutorials

Engine Oil and Oil Filter Replacement for the Ducati Scrambler
Engine Oil and Oil Filter Replacement for the Ducati Scrambler
Scrambler Learn the procedure for performing the routine maintenance service by replacing the engine oil and oil filter on the Ducati Scrambler. First, place y…
How to replace the engine oil and oil filter of the Ducati Scrambler
How to replace the engine oil and oil filter of the Ducati Scrambler
Scrambler In order to perform the routine maintenance check, you do not need any special equipment; let's see how to replace the engine oil and oil filter of t…
How to Change the Engine Oil and Oil Filter of the Ducati Scrambler
How to Change the Engine Oil and Oil Filter of the Ducati Scrambler
Scrambler The engine oil and filter on the motorcycle should be replaced at regular intervals to ensure proper engine function; here’s how to perform the routi…

What Does the V-Belt Light Indicate on a Yamaha NMAX Scooter and How to Remove It?

If the V-BELT light has illuminated on the instrument cluster of your Yamaha NMAX scooter, it means it is time to replace the drive belt as it has exceeded the relevant interval. You can entrust this maintenance task to your trusted workshop; the cost will not be particularly excessive. Once this is done, you can manually reset the light by following the procedure shown in this tutorial. First, turn on the instrument cluster, then repeatedly press the left button on the dashboard to reach the service interval in question. At this point, press and hold the right button once to initialise the reset, and a second time to complete it.

Watch the video!


by ScegliAuto

More videos