Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial we can see how to replace the engine oil in the Ducati Multistrada V4 Rally, an extremely simple and fast operation. First of all, make sure that the engine is cold enough, then remove the lower cover and place a container underneath the motorcycle. Next, locate the drainage hole bolt, unscrew it using a 14mm socket wrench and let all the oil in the system drain out. At this point, all that's left to do is to open the filter cap with an 8mm wrench, insert the replacement, reassemble everything and pour the necessary amount of oil through the designated upper hole.

Posted on 2 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the motor oil in the Ducati Multistrada?
How to replace the motor oil in the Ducati Multistrada?
Multistrada In this tutorial we can see how to replace the engine oil in the Ducati Multistrada, an extremely simple and fast operation. First of all, make sure …
How to Change the Engine Oil and Oil Filter on the Ducati Multistrada V4S
How to Change the Engine Oil and Oil Filter on the Ducati Multistrada V4S
Multistrada This guide explains how to perform routine maintenance on the Ducati Multistrada V4S by changing the engine oil and oil filter. First, place the bike…
How to Service the Ducati Multistrada 1200
How to Service the Ducati Multistrada 1200
Multistrada In this video tutorial, follow the instructions to replace the engine oil along with the oil filter, completing the regular service maintenance on a …

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos