Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In today's video, you will see how to replace the engine oil and oil filter on a Ducati Scrambler, performing the regular maintenance service. First, warm up your engine for a few minutes; then start by removing the silencer from your exhaust by disconnecting the two springs and unscrewing the mounting bracket screw. At this point, unscrew the oil drain bolt located under the engine, allowing the oil to drain into a container for about ten minutes; now remove the oil filter, which is located right next to it, by screwing in and tightening the new one by hand. Finally, add the new engine oil, ensuring it meets the correct specifications!

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Engine Oil and Oil Filter Replacement for the Ducati Scrambler
Engine Oil and Oil Filter Replacement for the Ducati Scrambler
Scrambler Learn the procedure for performing the routine maintenance service by replacing the engine oil and oil filter on the Ducati Scrambler. First, place y…
How to Change the Engine Oil and Oil Filter of the Ducati Scrambler
How to Change the Engine Oil and Oil Filter of the Ducati Scrambler
Scrambler The engine oil and filter on the motorcycle should be replaced at regular intervals to ensure proper engine function; here’s how to perform the routi…
How to replace the engine oil and oil filter of the Ducati Scrambler
How to replace the engine oil and oil filter of the Ducati Scrambler
Scrambler In order to perform the routine maintenance check, you do not need any special equipment; let's see how to replace the engine oil and oil filter of t…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos