Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Ducati Panigale 959
Part:

In this video tutorial, you will see how to remove and replace the brake and clutch levers on a Ducati Panigale 959 in simple steps. First, remove the front brake lever by undoing the fixing screw; then fit the new one, ensuring to grease the cable properly and tighten the screw. Next, move on to the clutch lever: again, undo the central screw to remove the lever; apply grease in this case as well and reassemble the lever, tightening the screw to the correct torque, following the tutorial to the end!

Updated on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the headlight bulb of the Ducati Panigale 959?
How do you replace the headlight bulb of the Ducati Panigale 959?
Panigale 959 To replace the headlight bulb on the Ducati Panigale 959, you need to access the inside of the headlight assembly, from the space located immediately…
How to Replace the Headlight Bulb on Ducati Panigale 959?
How to Replace the Headlight Bulb on Ducati Panigale 959?
Panigale 959 To replace the headlight bulb on the Ducati Panigale, access the rear of the headlight from the space immediately below the brake and clutch levers. …
How do you disassemble the engine of the Ducati Panigale 959?
How do you disassemble the engine of the Ducati Panigale 959?
Panigale 959 In order to disassemble the engine of the Ducati Panigale 959, you have to loosen all the screws that fix it to its housing compartment: you will als…

What Does the V-Belt Light Indicate on a Yamaha NMAX Scooter and How to Remove It?

If the V-BELT light has illuminated on the instrument cluster of your Yamaha NMAX scooter, it means it is time to replace the drive belt as it has exceeded the relevant interval. You can entrust this maintenance task to your trusted workshop; the cost will not be particularly excessive. Once this is done, you can manually reset the light by following the procedure shown in this tutorial. First, turn on the instrument cluster, then repeatedly press the left button on the dashboard to reach the service interval in question. At this point, press and hold the right button once to initialise the reset, and a second time to complete it.

Watch the video!


by ScegliAuto

More videos