Do it yourself
Frequently asked questions about cars and motorcycles

Model: Suzuki V Strom 650
Part:

To replace the levers of the Suzuki V-Strom 650, you need to loosen the screws that secure them to their housing on the sides of the handlebars: once the fixing screws of each lever have been removed, you can proceed by loosening the nut located at the end of the cable. Once these elements have been removed, you can connect the new nuts to the corresponding gears: then you will need to attach them to the handlebars and then you can verify that everything works correctly.

Posted on 13 February 2025 by ScegliAuto

Video tutorial

Related tutorials

V Strom 650 .. to replace the exhaust installed on the Suzuki V-Strom 650 XT by loosening the screws that fix this terminal to the appropriate supports on the right.. …
V Strom 650 .. order to replace the windshield of the Suzuki V-Strom 650, you need to loosen the four screws that hold it in place: these screws can be found on the.. …
V Strom 650 .. The oil change for the Suzuki V-Strom 650 can be performed by removing the drain plug from the oil reservoir, positioning a container.. …

How to Replace the Tyres on the Husaberg FE 450

In this guide, follow the instructions to remove and replace the tyres on the Husaberg FE 450 enduro bike. First, place the bike on a stand and lift the wheel off the ground; then, undo the bolts securing the brake caliper to remove it, as shown in the video. Next, unscrew the central axle of the wheel, removing the tyre from the rim (deflating it and using levers); then install the new tyre, ensuring it has the correct dimensions, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos