Do it yourself
Frequently asked questions about cars and motorcycles
In order to replace the headlight bulb of the Sherco 300, you need to loosen the screws that hold the front fairing of the motorcycle, just behind the handlebars. Once the screws holding the panel are loosened, you can completely remove it to disconnect the internal connector of the headlight assembly. At this point, you can remove the bulb from inside the headlight, replace it with a new one, and insert it back into its housing to ensure that everything is working correctly.

Posted on 18 December 2024 by ScegliAuto

Video tutorial

Related tutorials

Sherco 300 In order to replace the front headlight of the Sherco 300, you will need to use a tool to lever off the front fairing of the motorcycle completely, a…
Sherco 300 To replace the engine oil of a Sherco 300, start by placing the motorcycle on a flat surface and lifting it on a stand. Then, proceed by removing the…
Sherco 300 To replace the carburettor on the Sherco 300, loosen the screws securing the seat and the side panels located on both sides of the bike, just below t…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos