Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Sherco
    3. : Sherco 300

Sherco Sherco 300 - Video guides

Sherco Sherco 300
How to Replace the Clutch on a Sherco 300
You can replace the clutch installed on the Sherco 300 by loosening the screws that secure the cover located on the lower central part of the right side of the …Read all…
Posted on 18 March 2026 by ScegliAuto
Sherco Sherco 300
How do you disassemble the engine of the Sherco 300?
In order to disassemble the Sherco 300 engine, you need to loosen the screws that fix it to the housing in the center of the frame, also disconnecting all the …Read all…
Posted on 14 November 2025 by ScegliAuto
Sherco Sherco 300
How do you replace the exhaust valve of the Sherco 300?
In order to replace the exhaust valve of the Sherco 300, you need to loosen the screws that secure the exhaust manifold to the side of the engine block, so …Read all…
Posted on 24 October 2025 by ScegliAuto
Sherco Sherco 300
How to change the engine oil of a Sherco ST300?
To change the oil of a Sherco ST300 engine, start by placing the motorcycle on a stand to make it stable. Then, locate the oil drain plug on the engine …Read all…
Posted on 30 December 2024 by ScegliAuto
Sherco Sherco 300
How do you replace the headlight bulb of the Sherco 300?
In order to replace the headlight bulb of the Sherco 300, you need to loosen the screws that hold the front fairing of the motorcycle, just behind the …Read all…
Posted on 18 December 2024 by ScegliAuto
Sherco Sherco 300
How to change the motor oil of a Sherco 300?
To replace the engine oil of a Sherco 300, start by placing the motorcycle on a flat surface and lifting it on a stand. Then, proceed by removing the oil …Read all…
Posted on 25 November 2024 by ScegliAuto
Sherco Sherco 300
How to replace the spark plug of a Sherco 300?
Today we will focus on replacing the spark plug of our Sherco 300. To begin, it is necessary to carefully remove the seat and side fairings of the motorcycle …Read all…
Posted on 26 September 2024 by ScegliAuto
Sherco Sherco 300
How do you replace the front headlight of the Sherco 300?
In order to replace the front headlight of the Sherco 300, you will need to use a tool to lever off the front fairing of the motorcycle completely, also …Read all…
Posted on 29 August 2024 by ScegliAuto
Sherco Sherco 300
How to replace the air filter on the Sherco 300
The steps outlined in this guide will show us how to disassemble and replace the air filter of the Sherco 300 enduro motorcycle engine. First, we put the …Read all…
Posted on 24 June 2024 by ScegliAuto
Sherco Sherco 300
How do you replace the air filter of the Sherco 300?
In order to replace the air filter of the Sherco 300, you need to remove the motorcycle seat from its housing, so that it is possible to access the underlying …Read all…
Posted on 18 June 2024 by ScegliAuto
Sherco Sherco 300
How to Replace the Rear Shock Absorber on the Sherco 300?
To replace the rear shock absorber on the Sherco 300, completely remove the rear wheel of the bike by loosening the bolts that secure the wheel's central axle …Read all…
Posted on 21 August 2026 by ScegliAuto
Sherco Sherco 300
How to Replace the Carburettor on the Sherco 300?
To replace the carburettor on the Sherco 300, loosen the screws securing the seat and the side panels located on both sides of the bike, just below the seat. …Read all…
Posted on 3 August 2026 by ScegliAuto
Sherco Sherco 300
How to replace the exhaust on a Sherco 300?
To replace the exhaust on a Sherco 300, remove the right side panel, under which is the support for the upper part of the exhaust. Once the side panel is …Read all…
Posted on 21 August 2026 by ScegliAuto
Sherco Sherco 300
How to Replace the Water Pump on a Sherco 300?
To replace the water pump on a Sherco 300, you need to loosen all the bolts securing the cover protecting the clutch on the right side of the bike. Once the …Read all…
Posted on 15 June 2026 by ScegliAuto

See also:

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos