Do it yourself
Frequently asked questions about cars and motorcycles
The steps outlined in this guide will show us how to disassemble and replace the air filter of the Sherco 300 enduro motorcycle engine. First, we put the motorcycle on the stand and start by removing the rider's seat; then we will find the air filter box underneath, as shown in the video. At this point, we unscrew the filter screw to remove it, clean it, or replace it with a new one; we insert the new filter in the correct direction and finally tighten the screw, permanently securing the filter on the airbox, and finally reassemble the seat!

Posted on 24 June 2024 by ScegliAuto

This video is currently unavailable

Related tutorials

Sherco 300 In order to replace the air filter of the Sherco 300, you need to remove the motorcycle seat from its housing, so that it is possible to access the u…
Sherco 300 To replace the engine oil of a Sherco 300, start by placing the motorcycle on a flat surface and lifting it on a stand. Then, proceed by removing the…
Sherco 300 Today we will focus on replacing the spark plug of our Sherco 300. To begin, it is necessary to carefully remove the seat and side fairings of the mo…

How to Remove the Engine from a KTM EXC 300?

To remove the engine from the KTM EXC 300, you need to take out the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is removed, unscrew the bolts that secure the cylinder at the top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. The necessary parts can now be replaced, and you can subsequently reassemble all the components that were removed earlier.

Watch the video!


by ScegliAuto

More videos