Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Engine Oil of a Sherco 300?

Model: Sherco Sherco 300
Part: Engine oil

Video tutorial

To replace the engine oil of a Sherco 300, start by positioning the bike on a flat surface and lifting it onto a stand. Next, remove the oil filler cap to allow for easier drainage.

Place a container under the drain plug and unscrew it using a spanner. Once the old oil has drained, refit the drain plug.

Then, fill the engine with new oil, check the level, and start the engine to distribute the oil evenly. Once completed, you will have successfully finished the engine oil replacement for your Sherco 300.


Updated on 6 November 2026 by ScegliAuto


Related tutorials

Sherco 300 Today, focus on replacing the spark plug on your Sherco 300. First, carefully remove the seat and side panels of the bike to access the engine. Once …
Sherco 300 To change the oil of a Sherco ST300 engine, start by placing the motorcycle on a stand to make it stable. Then, locate the oil drain plug on the engi…
Sherco 300 In order to disassemble the Sherco 300 engine, you need to loosen the screws that fix it to the housing in the center of the frame, also disconnectin…

How to Replace the Headlight Bulb on the MV Agusta Brutale 800RR?

To replace the headlight on the MV Agusta Brutale 800, you need to loosen the screws that secure the corresponding optical unit: these screws will be located on the sides and underneath the headlight. Once the screws are removed, you can extract the optical unit from its housing and disconnect the connector located inside; at this point, you can remove the bulb inside so that you can insert the new one. The headlight can now be secured with the appropriate screws to ensure everything functions correctly.

Watch the video!


by ScegliAuto

More videos