Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today we will focus on replacing the spark plug of our Sherco 300. To begin, it is necessary to carefully remove the seat and side fairings of the motorcycle in order to access the engine. Once the engine is exposed, locate the cable that connects the spark plug to the coil and disconnect it gently. Next, use a suitable wrench to unscrew the spark plug from the cylinder head. This will require a certain precision to avoid damaging the engine. Finally, install the new spark plug following the steps in reverse, making sure to tighten it properly to ensure a secure seal.

Posted on 26 September 2024 by ScegliAuto

This video is currently unavailable

Related tutorials

How to change the motor oil of a Sherco 300?
How to change the motor oil of a Sherco 300?
Sherco 300 To replace the engine oil of a Sherco 300, start by placing the motorcycle on a flat surface and lifting it on a stand. Then, proceed by removing the…
How to Replace the Water Pump on a Sherco 300?
How to Replace the Water Pump on a Sherco 300?
Sherco 300 To replace the water pump on a Sherco 300, you need to loosen all the bolts securing the cover protecting the clutch on the right side of the bike. O…
How to replace the air filter on the Sherco 300
Sherco 300 The steps outlined in this guide will show us how to disassemble and replace the air filter of the Sherco 300 enduro motorcycle engine. First, we put…

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos