Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Sherco Sherco 300
Part: Pump

To replace the water pump on a Sherco 300, you need to loosen all the bolts securing the cover protecting the clutch on the right side of the bike. Once the cover is removed, there will be another small cover attached to it under which the water pump is located. By unscrewing the appropriate cover, you can remove the part from its housing and replace it with a new one. After installing the pump on the cover, it must be reinserted to protect the clutch and secured with the appropriate bolts, ensuring everything functions correctly.

Updated on 30 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the motor oil of a Sherco 300?
How to change the motor oil of a Sherco 300?
Sherco 300 To replace the engine oil of a Sherco 300, start by placing the motorcycle on a flat surface and lifting it on a stand. Then, proceed by removing the…
How to Replace the Carburettor on the Sherco 300?
How to Replace the Carburettor on the Sherco 300?
Sherco 300 To replace the carburettor on the Sherco 300, loosen the screws securing the seat and the side panels located on both sides of the bike, just below t…
How to replace the exhaust on a Sherco 300?
How to replace the exhaust on a Sherco 300?
Sherco 300 To replace the exhaust on a Sherco 300, remove the right side panel, under which is the support for the upper part of the exhaust. Once the side pane…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos