Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the carburettor on the Sherco 300, loosen the screws securing the seat and the side panels located on both sides of the bike, just below the seat. Once these are removed, you will have access to the components inside: the old carburettor can be removed from the top of the engine block by unscrewing the screws that hold it in place and disconnecting the various pipes and connectors. This will allow you to fit a new carburettor, reassembling all the components that were previously removed.

Updated on 3 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Water Pump on a Sherco 300?
How to Replace the Water Pump on a Sherco 300?
Sherco 300 To replace the water pump on a Sherco 300, you need to loosen all the bolts securing the cover protecting the clutch on the right side of the bike. O…
How do you replace the headlight bulb of the Sherco 300?
How do you replace the headlight bulb of the Sherco 300?
Sherco 300 In order to replace the headlight bulb of the Sherco 300, you need to loosen the screws that hold the front fairing of the motorcycle, just behind th…
How to change the motor oil of a Sherco 300?
How to change the motor oil of a Sherco 300?
Sherco 300 To replace the engine oil of a Sherco 300, start by placing the motorcycle on a flat surface and lifting it on a stand. Then, proceed by removing the…

How to Replace the Headlight Bulbs on the KTM RC 200?

As shown in this tutorial, replacing the headlight bulbs on the KTM RC 200 is an extremely simple and quick task. First, ensure that the key is not inserted for safety. Then, approach the headlight in question, locate the bulb holder, and turn it slightly counter-clockwise. Once done, disconnect the power connector, attach the new bulb, and reassemble everything. Avoid touching the glass of the replacement bulb directly with your bare hands, as any residues could cause it to overheat.

Watch the video!


by ScegliAuto

More videos