Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Sherco Sherco 300
Part: Shocks

To replace the rear shock absorber on the Sherco 300, completely remove the rear wheel of the bike by loosening the bolts that secure the wheel's central axle to the end of the swingarm. Once the wheel is removed and freed from the chain, locate the shock absorber, which can be extracted by loosening the bolts that secure it at the top and bottom. At this point, insert the new shock absorber, securing it with the appropriate bolts and reinstalling the rear wheel.

Updated on 21 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the motor oil of a Sherco 300?
How to change the motor oil of a Sherco 300?
Sherco 300 To replace the engine oil of a Sherco 300, start by placing the motorcycle on a flat surface and lifting it on a stand. Then, proceed by removing the…
How do you replace the headlight bulb of the Sherco 300?
How do you replace the headlight bulb of the Sherco 300?
Sherco 300 In order to replace the headlight bulb of the Sherco 300, you need to loosen the screws that hold the front fairing of the motorcycle, just behind th…
How do you replace the air filter of the Sherco 300?
How do you replace the air filter of the Sherco 300?
Sherco 300 In order to replace the air filter of the Sherco 300, you need to remove the motorcycle seat from its housing, so that it is possible to access the u…

How to Replace the Engine Oil and Oil Filter on an Aprilia RSV 1000

This short video will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Aprilia RSV 1000 motorcycle. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter, replacing the cartridge with a new one as shown in the video. Finally, unscrew the filler screw and top up by pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos