Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Briefly follow these instructions to remove and replace the spark plugs on the engine of the Triumph Speed Triple 1050. First, place the motorcycle on a stand and start by removing the fuel tank. Next, take off the air filter box, then disconnect the three spark plug leads as shown in the video. At this point, use a socket wrench with an extension to unscrew and remove the spark plugs, replacing them with new ones. Hand-tighten them and then gently tighten with the wrench, reassembling the air filter box and the tank!

Updated on 7 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Speed Sensor on the Triumph Speed Triple 1050
How to Replace the Speed Sensor on the Triumph Speed Triple 1050
Speed Triple In this guide, learn how to replace the coolant on the Triumph Speed Triple 1050 in simple and quick steps. First, place the bike on a stand and star…
Dismantling the rear wheel of the Triumph Speed Triple 1050.
Dismantling the rear wheel of the Triumph Speed Triple 1050.
Speed Triple Today's steps will show us how to disassemble the rear wheel of the Triumph Speed Triple 1050. First, we place the motorcycle on the stand and start …
How to Change the Engine Oil and Oil Filter on the Triumph Speed Triple 1050
How to Change the Engine Oil and Oil Filter on the Triumph Speed Triple 1050
Speed Triple This brief guide shows how to perform routine maintenance by changing the engine oil and oil filter on the Triumph Speed Triple 1050. First, unscrew …

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos