|
Do it yourself
| |||
| ||||
|
Model: Triumph Speed Triple
In this guide, learn how to replace the coolant on the Triumph Speed Triple 1050 in simple and quick steps. First, place the bike on a stand and start by removing any plastic fairing under the engine; then remove the side fairings and disconnect the coolant hose, allowing the old fluid to drain into a container, as shown in the video. At this point, unscrew the radiator cap and pour in the new antifreeze, filling to the required level!
Updated on 14 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Speed Triple
In this guide, we will look at the main instructions on how to disassemble and replace the clutch of the Triumph Speed Triple 1050. First, we place t…
Speed Triple
Below are the steps to remove and replace the rear wheel or tyres of the Triumph Speed Triple 1050. First, place the motorcycle on a stand and begin …
Speed Triple
Today's steps will show us how to disassemble the rear wheel of the Triumph Speed Triple 1050. First, we place the motorcycle on the stand and start …
|
How to Perform Routine Maintenance on the Benelli 502C
In this short and simple guide, you will learn how to perform routine maintenance on the Benelli 502C motorcycle. First, place the motorcycle on a stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then replace both the engine oil and the oil filter. Next, check the correct tension of the drive chain by adjusting it at the wheel nut; finally, check the brake fluid and coolant levels, and inspect the brake wear! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.008
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |