Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this guide, we will look at the main instructions on how to disassemble and replace the clutch of the Triumph Speed Triple 1050. First, we place the motorcycle on a stand and begin to unscrew the screws securing the clutch cover in order to remove it; then we unscrew the screws of the clutch pack, removing all the discs one by one, as shown in the video. At this point, we install the new clutch discs, alternating the two different types; we then reassemble the pressure plate and the new gaskets, installing the clutch covers last. Finally, we adjust the clutch disengagement using the adjusters!

Posted on 30 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Speed Sensor on the Triumph Speed Triple 1050
How to Replace the Speed Sensor on the Triumph Speed Triple 1050
Speed Triple In this guide, learn how to replace the coolant on the Triumph Speed Triple 1050 in simple and quick steps. First, place the bike on a stand and star…
Dismantling the rear wheel of the Triumph Speed Triple 1050.
Dismantling the rear wheel of the Triumph Speed Triple 1050.
Speed Triple Today's steps will show us how to disassemble the rear wheel of the Triumph Speed Triple 1050. First, we place the motorcycle on the stand and start …
How to replace the engine oil in the Triumph Speed Triple 1050 S?
How to replace the engine oil in the Triumph Speed Triple 1050 S?
Speed Triple In this tutorial we can see how to replace the engine oil in the Triumph Speed Triple 1050 S, an extremely simple and fast operation. First of all, m…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos