Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front and Rear Wheel of the Triumph Speed Triple 1050

Model: Triumph Speed Triple
Part: Wheel

Video tutorial

Below are the steps to remove and replace the rear wheel or tyres of the Triumph Speed Triple 1050. First, place the motorcycle on a stand and begin loosening the fixing screws of the front brake caliper to remove it; then, unscrew the central axle of the wheel to slide it out of the forks, replacing the tyre if necessary, as shown in the video.

At this point, perform the same procedure for removing the rear wheel by loosening the central nut of the wheel; apply the reverse procedure for reassembly!


Updated on 4 September 2026 by ScegliAuto


Related tutorials

Dismantling the rear wheel of the Triumph Speed Triple 1050.
Dismantling the rear wheel of the Triumph Speed Triple 1050.
Speed Triple Today's steps will show us how to disassemble the rear wheel of the Triumph Speed Triple 1050. First, we place the motorcycle on the stand and start …
How to Remove and Install the Rear Wheel of the Triumph Speed Triple
Speed Triple Today we will see the instructions that will allow us to remove and install the rear wheel of the Triumph Speed Triple motorcycle. First, lift the re…
How to Replace the Speed Sensor on the Triumph Speed Triple 1050
How to Replace the Speed Sensor on the Triumph Speed Triple 1050
Speed Triple In this guide, learn how to replace the coolant on the Triumph Speed Triple 1050 in simple and quick steps. First, place the bike on a stand and star…

How to replace the transmission oil in the KTM Exc 300

Today, let's discover how to carry out the routine maintenance service by replacing the transmission oil in the two-stroke enduro bike KTM Exc 300. First, place your bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing the gearbox oil to drain into a container for about ten minutes; then clean the small mesh oil filter, as shown in the video. At this point, unscrew the filler cap and top up with the new gearbox oil, the specifications of which are indicated in the owner's manual!

Watch the video!


by ScegliAuto

More videos