Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today we will see the instructions that will allow us to disassemble and install the rear wheel of the Triumph Speed Triple motorcycle. First of all, we lift the rear wheel off the ground with a stand and start unscrewing the central nut of the rear wheel, using a socket wrench with an extension; then we remove the wheel from the rear axle, as shown in the video. At this point, if necessary, we replace the rear tire or brake disc, then reassemble the rear wheel; all that's left is to apply the reverse process for reassembling the rear wheel!

Posted on 14 July 2024 by ScegliAuto

This video is currently unavailable

Related tutorials

Dismantling the rear wheel of the Triumph Speed Triple 1050.
Dismantling the rear wheel of the Triumph Speed Triple 1050.
Speed Triple Today's steps will show us how to disassemble the rear wheel of the Triumph Speed Triple 1050. First, we place the motorcycle on the stand and start …
How to Remove the Front and Rear Wheel of the Triumph Speed Triple 1050
How to Remove the Front and Rear Wheel of the Triumph Speed Triple 1050
Speed Triple Below are the steps to remove and replace the rear wheel or tyres of the Triumph Speed Triple 1050. First, place the motorcycle on a stand and begin …
How to Remove the Front Wheel of the Triumph Speed Triple
How to Remove the Front Wheel of the Triumph Speed Triple
Speed Triple In this video tutorial, you will learn how to remove and replace the front wheel or tyre of the Triumph Speed Triple in simple and quick steps. First…

Where is the battery located on the Piaggio Vespa GTS 125 scooter?

This video shows where the battery is located on the Piaggio Vespa GTS 125 scooter, useful if you need to recharge or replace it directly. As shown, the battery is located in the lower part of the scooter, right between the two footrests. To access it, simply unscrew the 4 fixing bolts of the lower plastic panel with a T25 Torx key. To remove the battery, you will need to take out the single bolt of the fixing bracket and disconnect both terminals, starting with the negative. Always ensure the key is removed before working.

Watch the video!


by ScegliAuto

More videos