Do it yourself
Frequently asked questions about cars and motorcycles

Model: Ducati Scrambler
Part: Clutch

In today's tutorial video, we will see the main steps to disassemble and replace the clutch kit on the Ducati Scrambler by following these simple steps. First, drain the engine oil from your bike by unscrewing the drain bolt located under the engine; then remove the clutch cover, found on the right, by unscrewing all the fastening screws. At this point, unscrew the central screws of the aluminium disc and then slide out all the other cork discs, as shown in the video; insert the new discs of the correct type, and reassemble everything!

Updated on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Scrambler To replace the clutch on the Ducati Scrambler, loosen the bolts securing the cover on the right side of the bike. This will allow access to the under…
Scrambler The procedure for replacing the clutch on a Ducati Scrambler involves loosening the bolts that secure the cover on the right side of the bike, comple…
Scrambler To replace the clutch on the Ducati Scrambler, loosen the bolts securing the cover on the right side of the bike and remove the cover. This will allo…

How to Change the Speed Unit on the Piaggio Mp3

If the speed displayed on your Piaggio Mp3 is in a unit of measurement different from your preference, simply follow this mini guide to change it independently. First, start this procedure with the bike completely off. Then, press and hold the "Mode" button on the right knob for about three seconds and turn on the display. Once done, press the "Mode" button again to switch between units (from Km/h to Mph or vice versa). Finally, hold down "Set" to save the changes.

Watch the video!


by ScegliAuto

More videos