Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Thermostat on the Ducati 748

Model: Ducati 748
Part: Engine coolant temperature sensor

This video is currently unavailable

In this tutorial, you will learn how to remove and replace the thermostat or the coolant temperature sensor on the Ducati 748, following the instructions below. First, remove the side fairing to access the water pump; then disconnect the coolant hose, allowing it to drain into a container.

At this point, disconnect the electrical connector of the temperature sensor using a socket spanner to remove it and replace it with the new one; for reassembly, simply apply the reverse procedure!


Updated on 7 June 2026 by ScegliAuto


Related tutorials

748 To replace the battery on a Ducati 748, loosen the bolts securing the fairing located on the right side of the bike, just behind the front wheel. Onc…
748 To replace the air filter on a Ducati 748, loosen the screws securing the front fairing and remove it. Once the front fairing is removed, unscrew the…
748 In this video, see how to remove and replace the engine air filter on a Ducati 748, two-seater version. First, remove the side fairings along with th…

Replacing the Rear Brake Pads of the BMW G310 GS

Follow these brief instructions to remove and replace the rear brake pads (this also applies to the front ones) of the BMW G310 GS motorcycle. First, place the bike on a stand and start by removing the pin and the clip from the rear brake caliper; then remove the old brake pads as shown in the video. Next, clean the caliper of any residual dirt, install the new original brake pads, and secure the pin and clip to lock everything in place, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos