Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, you will see how to replace the engine oil in a Ducati 959 Panigale, a simple operation that requires good manual skills. For this, you will need a 3mm hex key, a 4mm hex key, a 14mm socket wrench, and an 8mm socket wrench. First, unscrew the screws securing the lower fairing, then remove it and position a container underneath the engine. Next, unscrew the drain bolt, allow all the oil in the system to drain out, and remove the filter cap. Finally, insert the replacement, tighten the lower bolt, and add the required amount of oil through the upper hole.

Updated on 29 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in a Ducati Panigale 959?
How to Change the Engine Oil in a Ducati Panigale 959?
Panigale 959 As shown in this tutorial, changing the engine oil in a Ducati Panigale 959 is an extremely simple and quick operation. First, ensure the engine is s…
How to Change the Engine Oil in the Ducati Panigale 959?
How to Change the Engine Oil in the Ducati Panigale 959?
Panigale 959 In this tutorial, you will see how to change the engine oil in the Ducati Panigale 959, a very simple and quick operation to be performed every 12 mo…
How to replace the engine oil and oil filter of the Ducati Panigale 959.
How to replace the engine oil and oil filter of the Ducati Panigale 959.
Panigale 959 Below, we will discover the instructions that will allow us to perform the routine maintenance service on the Ducati Panigale 959 motorcycle. First, …

Where is the Battery on the Piaggio Medley 125 Scooter and How to Remove It?

In this video, see where the battery is located on the Piaggio Medley 125 scooter and how to remove it, a very simple and quick operation. As shown, it is located behind the front storage compartment, positioned under the handlebars. To access it, first open the compartment, then remove the right cover by unscrewing the relevant screws with a cross-head screwdriver. Once done, unscrew the additional screws of the battery cover with a Torx T25 key, extract it, and disconnect both terminals with the same screwdriver. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos