Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Ducati 848
Part: Brake pads

Follow this guide for instructions on how to remove and replace the front brake pads on the Ducati 848 motorcycle. First, place your bike on a stand and start unscrewing the bolts securing the front brake caliper; then remove the small pin from the caliper, thus taking out the old brake pads, as shown in the video. Now, lever the caliper piston, cleaning the caliper of dirt; then install the new high-quality brake pads, applying the reverse procedure of disassembly!

Updated on 4 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Brake Pads on the Ducati 848
How to Replace the Rear Brake Pads on the Ducati 848
848 In today's video tutorial, see how to remove and replace the rear brake pads on the Ducati 848. First, place the motorcycle on a stand and start by u…
How to Replace the Battery of the Ducati 848
How to Replace the Battery of the Ducati 848
848 In today's video tutorial, you will see how to remove and replace the battery of the Ducati 848, as well as the 1098 and 1198. First, remove the left…
How to Replace the Air Filter on a Ducati 848?
How to Replace the Air Filter on a Ducati 848?
848 To replace the air filter on a Ducati 848, you need to unscrew the bolts securing the front fairing of the bike, located on the side and front, just …

How to Reset the Engine Oil Light on a Yamaha XMax 250

This short video demonstrates the procedure to reset the engine oil light on a Yamaha XMax 250 scooter. The operation is very simple and quick; first, insert the motorcycle key into the designated slot and turn it to the first position to power on the instrument panel without starting the vehicle. At this point, you will see the light on the display; simply press the "oil change" button located at the centre of the motorcycle's speedometer and hold it until the light stops flashing. The operation will then be complete; to verify success, turn off and then turn on the instrument panel.

Watch the video!


by ScegliAuto

More videos